TQ R/C & Hobbies

Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025)

 

Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:


Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:

https://forms.gle/ZqUybUaVissSRpbb8

Registration fee: IDR 300,000 per racer, eligible for 20 run

Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country.  For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.

Regulation:

1.  Race system is bracket system 4-2-1

Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined

2.  All parts MUST BE Tamiya original parts. 
3.  Racer can use their own rechargeable batteries
4.  Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5.  Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.

Other things to note:

1.  Please note that all racers should bear their own tickets and accomodation to Jakarta.
2.  Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.

1/10 SCALE R/C MINI COOPER RACING (MB-01 CHASSIS)

Rate this item
(0 votes)
1/10 SCALE R/C MINI COOPER RACING (MB-01 CHASSIS) 1/10 SCALE R/C MINI COOPER RACING (MB-01 CHASSIS) MINI trademarks used are licensed by BMW AG. Length: 315mm. Image shows assembled and painted kit.

Item No:58747

All Electric R/C Car Series No.747

1/10 SCALE R/C MINI COOPER RACING (MB-01 CHASSIS)

About 5.3 million units of the Mini were produced from 1959 until 2000 - remarkably without major model changes - and this legendary little car even achieved second place in the Car of the Century award for the best cars of the 20th century. Its front-wheel drive layout was rare for its time, and it featured ergonomic body structure with compact mechanics and maximum interior space, as well as frisky performance. In 1961, the sporty Mini Cooper joined the line-up and with great racing success, the car gained even greater popularity around the world. This assembly kit creates a radio control model assembly kit depicting the car, with stickers included for the bonnet stripes, body-side pinstripes and racing numbers. 8-spoke wheels are paired with 60D radial tires.

The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbase, and front- or rear- wheel drive system. This model employs a front-wheel drive setup. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.

Specifications
★Length: 315mm, width: 167mm, height: 140mm ★Wheelbase: 210mm (Short) ★Tread: 140mm (front & rear) ★Tire width/diameter: 25/59mm (front and rear) ★Bathtub type chassis ★Front-wheel drive ★4-bevel differential gear ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Friction dampers ★Gear ratio = 5.83:1 (using kit 29T pinion) ★Type 540 motor ★ESC included for export.

Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of August 5, 2025. Specifications are subject to change without notice.

Read 4052 times
Published in Tamiya
Tagged under
Social sharing

Related items (by tag)

More in this category: « CROSS SPEAR 01 (VZ CHASSIS) JAPAN CUP 2025 JUN WATANABE TAMIYA LOGO SHOULDER POUCH (KHAKI) »
back to top

Our Products

Links

 

 

Social sharing

Who's Online

We have 191 guests online