TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

Friday, 27 May 2011 17:33

EZRUN-150A-SD Brushless ESC for 1/5 Car (Competition Race)

Rate this item
(0 votes)

1   Specification

 

1.1 Output: Continuous current 150A, burst current 1080A.
1.2 Input: 6
-18 cells NiMH/NiCd or 2-6 cells LiPo.
1.3 BEC Output: 5.75V/3A (Switch mode built-in BEC).
1.4 Resistance: 0.0002 Ohm.
1.5 Motor Supported: Sensorless and sensored brushless motors
1.6 Suitable Brushless Motor: 6T and > 6T
1.7 Suitable Car: 1/5 on-road or off-road cars / trucks for competitive race.
1.8 Size:
68mm(L) * 55mm(W) * 45mm(H).
1.9 Weight: 150
g(Without wires)
2   Features
1.1   Compatible with all sensorless brushless motors and most of sensored brushless motors such as Novak, LRP and Feigao, etc.
1.2   Excellent start-up, acceleration and linearity features.
1.3   3 running modes (Forward only with brake, Forward/Reverse with brake, Forward/Reverse immediately)
1.4   4 steps of maximum reverse force adjustment.
1.5   Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
1.6   9 start modes (Also called “Punch”) from “very soft (Level 1)” to “very aggressive (Level 9)”.
1.7   Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
1.8   8 steps of timing adjustment by software.
1.9   Built-in switch mode BEC has a powerful output to supply all the electronic equipments.
1.10 Easily program with only one button and compatible with pocket-sized Program Card. 
1.11 Firmware can be updated through an USB adapter (Optional equipment). 
1.12 Splash proof and dustproof.

Social sharing

Who's Online

We have 689 guests online