TQ R/C & Hobbies

Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025)

 

Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:


Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:

https://forms.gle/ZqUybUaVissSRpbb8

Registration fee: IDR 300,000 per racer, eligible for 20 run

Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country.  For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.

Regulation:

1.  Race system is bracket system 4-2-1

Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined

2.  All parts MUST BE Tamiya original parts. 
3.  Racer can use their own rechargeable batteries
4.  Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5.  Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.

Other things to note:

1.  Please note that all racers should bear their own tickets and accomodation to Jakarta.
2.  Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.

Page 4 of 318

Rate this item
(1 Vote)
Item No:15544 Mini 4WD Grade-Up Parts No.544 LARGE DIA. LOW FRICTION LOW-PROFILE TIRES (31mm) & CARBON WHEELS (DISH) This set includes four each of carbon fiber wheels and low-friction large-diameter (31mm) low-profile tires. The wheels are highly durable, while the tires are harder than kit standard ones, offering less grip and helping your car maintain speed through corner sections as well as limiting bounce. Both wheels and tires are black. Information is current as of…
Rate this item
(0 votes)
Item No:22092 Hop-Up Options No.2092 DT-04 FULL BALL BEARING SET Ball bearings are a great first step in tuning up your chassis, reducing friction in the drivetrain and giving longer drivetimes as well as lessening wear and tear. 850 size ball bearings are used in the steering linkage. ★Contents: 1150 ball bearings x10, 1050 and 850 ball bearings x 4 each. Information is current as of February 5, 2025. Specifications are subject to change without…
Rate this item
(0 votes)
Item No:51757 R/C Spare Parts No.1756 DT-04 F PARTS (FRAME) Replace parts in a timely fashion to ensure that your car runs at peak performance. Information is current as of February 5, 2025. Specifications are subject to change without notice.
Rate this item
(0 votes)
Item No:51756 R/C Spare Parts No.1756 DT-04 C PARTS (COWLINGS) Replace parts in a timely fashion to ensure that your car runs at peak performance. Information is current as of February 5, 2025. Specifications are subject to change without notice.
Rate this item
(0 votes)
Item No:51755 R/C Spare Parts No.1755 DT-04 B PARTS (UPRIGHTS) Replace parts in a timely fashion to ensure that your car runs at peak performance. Information is current as of February 5, 2025. Specifications are subject to change without notice.
Rate this item
(0 votes)
Item No:58741 All Electric R/C Car Series No.741 1/10 R/C FIGHTER NXGEN (DT-04 CHASSIS) ★This R/C model assembly kit is the first on the DT-04, a chassis which offers ease of assembly and lively performance. ★4-wheel independent double wishbone suspension uses CVA oil dampers, and the 22.5 degrees of caster on the front arms help the model take on rough terrain. ★Build up the body by attaching its individual panels to the model’s pipe frame.…
Rate this item
(0 votes)
Item No:58744 All Electric R/C Car Series No.744 1/10 R/C Audi 90 quattro Racing (TT-02 CHASSIS) ★This model recreates the Audi 90 quattro Racing, a car which flourished at American races in 1989. ★The imposing wide form of the car is depicted with a polycarbonate body, with dedicated dish wheels for this model. ★The TT-02 chassis offers reliable shaft-driven 4WD.   Separately Required Items​★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger…
Rate this item
(0 votes)
Item No:56377 1/14 R/C Tractor Truck Series No.77 40-FOOT CONTAINER 3-AXLE SEMI-TRAILER for TAMIYA 1/14 R/C TRACTOR TRUCK ★This realistic assembly kit semi-trailer and container are for use with Tamiya 1/14 scale R/C tractor trucks. ★The container uses a combination of aluminum frame and ABS plastic panels, and is attached to the semi-trailer in the same way as a full-size counterpart. ★The chassis employs aluminum side frames, as well as leaf springs in the 3-axle…
Rate this item
(0 votes)
Item No:32606 1/48 Military Miniature Series No.106 1/48 SCALE U.S. LIGHT TANK M5A1 STUART The M5A1 saw plenty of action in a reconnaissance role during WWII. Tamiya designers researched full-size vehicles extensively in the development of this model. ★Features such as the turret, grousers and 7.62mm machine gun will attract the eye. ★Assembly type tracks feature one piece straight sections. ★Comes with one figure and two 1944 Western Front marking options. Information is current as…
Rate this item
(0 votes)
Item No:24369 1/24 Sports Car Series No.369 1/24 SCALE Honda CITY TURBO First sold in October 1981, the tall profile City was a popular addition to the Honda line-up, and in September 1982 its line-up was joined by the City Turbo, a model with a 100hp 1.2-liter inline-4 engine and turbocharger that sported a power bulge in the bonnet and air dam bumpers. The Motocompo went on sale at the same time as the City,…
Page 4 of 318

Social sharing

Who's Online

We have 478 guests online