TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

Jan 2022
Jan 2022

Jan 2022 (9)

This new 1963 Ford Falcon from JConcepts is intended for street racing and drops to the popular Team Associated DR10 and SCT conversions as well as drag racing builds currently in the market. During the design, it was important to maintain a narrow width to match track widths of popular vehicles and to slip through the air at a high rate of speed. Also, a lower trim line on the sides and front chin-spoiler minimises draft inside the body shell. The round and beady headlights create the feel for this legendary vehicle and the bar grille separates a broad front-end.…
LC Racing release this optional body shell for their 1/14th scale EMB1 buggy. Made from high quality polycarbonate, the new shell offers a more conventional mid cab design, in place of the kit standard cab forward body shell design. Supplied unpainted.
Destiny have introduced their new RX-10F 2.0 FWD 1/10th scale chassis. Utilising a new mid motor platform design, the motor mount and centre layshaft are combined in a single bulkhead. Up front there is a new clamp design single bell-crank steering system, with 4 different Ackermann positions, that features two large ball bearing for improved reliability and precision. Integrated into the bumper is the ability to mount up to two pieces of 40g weights to easily help balance out the chassis for different conditions. The new 2.25mm slim main chassis, 2.0mm multi-flex design upper deck and 3.0mm front and rear…
Serpent have released their new Viper 989E, the latest electric version of their 989 1/8th scale chassis. Electric racing has developed big time and the 989E is designed to take care of that power and put it down as effectively as possible. Based on the successful 989 gas racer and sharing it’s suspension, shocks and quite a lot of other features like the chassis plate and drivetrain, there are many EP specific parts on this car as well. They have made room for serious power with the batteries mounted on a 2.5mm thick carbon plate, the variety of packs can…
Axial have introduced another first with the 1/10 scale RBX10 Ryft 4WD. This ready-to-run vehicle lets any RC driver experience the thrills of rock bouncer off-road action. Full-size rock bouncers refuse to stop, or even back down on the throttle, when facing steep climbs and massive rocks. So does the RBX10 Ryft 4WD. The robust, custom tube chassis is engineered from a high-strength composite plastic that withstands the hard knocks of RC off-roading, even while moving at the high speeds produced by a strong powertrain featuring a 4S-capable, 2200Kv brushless motor. Both the front and rear axles boast a rugged…
As the monster truck segment evolves, options are key and with a range of sizing, wheelbase requirements, the Escalade by JConcepts fits several trucks currently on the market, including the Losi LMT. On the design side, the dramatic grille is placed front and centre with the stunning and tall front headlights to create an impact. In the world of SUV’s there is nothing more iconic than the look and stance of the Escalade. The high-slope windshield angle cuts through the air with a tightly compressed rails on top to channel air over the large cab and rear enclosure. The SUV…
From Exotek Racing is their new Super F1 race body for the F1Ultra and similar dimensioned narrow style 1/10 F1 pans cars. A modern design with slim style side pods with the addition of high downforce aero details for good looks and high performance you’ve come to expect from Exotek designed bodies. Made using premium polycarbonate that is a proprietary custom blended polycarbonate only for Exotek that is much stronger and longer lasting than other similar thickness polycarbonate. Made of lightweight .7mm polycarbonate, the painted body shown in the pic is only 33g including the paint, stickers and helmet.
From Yeah Racing, an upgrade to their Tornado series of cooling fans will be their upcoming series of Twistex shrouded fans. Designed for cooling high performing touring car motors which reach high temperatures, the specially designed shroud directs airflow and helps dissipate heat. It includes stealthy black wires for that pro factory look and the shroud features a groove in the bottom to allow for routing the cable on either sides, for clean installations.
Presenting Wolverine, ZooRacing’s newest high-performance touring car body on the market. Featuring lots of new features to improve the handling, making it more dynamic, more contact pressure offers more stability in corners with lots more rotation. The aerodynamic efficiency has been improved again as well. The overall length has been shortened to achieve a lesser inertia and therefore a better rotation around the vertical axis. For more steering in fast corners they’ve redesigned the front and hood and made them steeper. To more easily steer the airflow along the sides over the rear wheel arches to the rear wing, to…

News

Social sharing

Who's Online

We have 362 guests online