TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF


New Sanwa MX-6
Place your order now….

Hobby Wing



Aug 2022
Aug 2022

Aug 2022 (11)

JConcepts unveiled a new body during the 2021 ROAR Fuel Nationals for the 1/8th truck division. The F2 body was constructed to perform at the highest level using the latest trend of reducing surface area above the shock tower line, reducing the overall weight while maintaining a tight silhouette. What stands out on the JConcepts body is the raised nose that planes off the front shock tower. This design and styling were chosen over the buggy style mount to provide a better look, a cleaner and more durable fit and a better overall flow aerodynamically. To mount the F2 body,…
Following the successful launch of the MTC2 electric touring car, Mugen Seiki have announced the MTC2 FWD. The kit is based off the MTC2 touring car and uses the same high-quality materials and parts. Ronald Völker was instrumental in the testing and development of the MTC2 FWD. The car has a mid-front motor layout and uses a lot of parts from the MTC2 electric touring car. The focus when designing and testing the MTC2 FWD was to get the best weight distribution along with reaching the weight limits for this class. Another focus was to maximise the number of interchangeable…
Pro-Line have introduced the new 2021 Chevy Silverado 2500 HD made to fit the E-REVO 2.0 and MAXX when using extended body mounts like Pro-Line’s 6307-00 or 6370-00. Proudly Made in the USA, this body is made from durable polycarbonate material that allows you to put your custom paint job onto your body. Paint-then-peel overspray film, window masks and scale Pro-Line decals are included with the body to take it to the next level.
Now you can have a Pro-Line Axis ST body for your Mini-T 2.0 to match your 1:10 version. The all-new Axis series of race bodies is a clean-sheet design from Pro-Line bringing a fresh new look to the class. Designed with the latest in CAD technology, the Axis features a super low-slung design with sharp lines throughout giving it an unmistakable look on the track and fits the Mini-T 2.0 chassis perfectly. The Axis is a cab-forward design that provides an enhanced steering response to get you around the track faster than ever. The Axis is made from light-weight polycarbonate…
OS have introduced the new OS Speed B2104, a long-stroke .21 offroad engine, featuring quicker response in the low range and more torque in middle range, along with consistent idling. The new piston/liner is conventional 3-port type enabling more torque over the power range, while the new crankshaft has DLC coating and two tungsten counterweights embedded in the crankshaft contributing to consistent idling and quick return to idle. The boost port and the exhaust port of the crankcase are redesigned for optimum air flow, while the rest of the engine remains familiar with the use of 22E type carburettor and…
Hasi Tuned have introduced their new R21 Swiss Spec .21 nitro engine intended for the use with 1/8th on-road cars. Based on the 7 port O.S. R21 engine, the 2021 version is the result of two years of development with their team. The Swiss Spec features new timing and new improvements on the cylinder, these upgrades making a great difference compared to the previous engine. The R21 Swiss Spec .21 on-road nitro engine is only available pre broken-in and either separately or as combos with a standard or hard coated pipe.
Team Associated’s Pro2 SC10 is a Ready-To-Run RC replica of the Pro 2 trucks driven in Off Road Racing. It features a rear motor short-course chassis that uses many of the same parts from the widely successful RC10SC5M platform. Adjustable aluminium big-bore coil-over shocks, a sealed-gear differential and heavy-duty CVA driveshafts are all features that come standard on the Pro2 SC10. A powerful water-resistant Reedy electronic speed controller and 3300kV electric motor power the Pro2 SC10 for hours of high-speed fun. To handle the power the Pro2 SC10 comes equipped with realistic Method Race wheels and tires specifically made to…
Mugen Seiki have presented their new Ninja JX21-B06 offroad buggy engine. The innovative JX21-B06 includes the easy to tune 22E carburettor with 6.5mm reducer which provides smoother, easy to drive, power and increased fuel efficiency. The B06 has a square bore and stroke which has smoother power characteristics and improved fuel consumption. Internally, the DLC coated crankshaft is tungsten weighted while on top, the lightweight cooling head provides exceptional cooling and stable operating temperatures.
The YD-2 from Yokomo has undergone a major evolution, with the brand new machine bearing the name of “Z”, which can be said to be the final form. It is equipped with a new 3-split transmission case on the shape-up main chassis and will start as a new standard machine. A new integrated bulkhead is used around the front to improve the left-right balance of the steering and improve operability and the new upper deck is compatible with slide racks as standard in the kit, and steering characteristics suitable for various situations can be obtained with minimal changes. The gear…
JConcepts’ S2 body line up has been expanded to include the Schumacher Cat L1 Evo 4wd buggy. Slammed overall height allows the S2 to whisk through the turns with a low centre of mass while the progressive cab design provides plenty of front-end force for superior balance and steering. A channeled roof directs the flow through the centre of the body while also increasing the rigidity of cockpit. The dual side-window design that has become famous on the JConcepts bodies remains to bring a traditional feel to the layout. The upper side-pods feature distinct vents used to help relieve hot…
Based on the successful R8S On-Road Pan Car platform, the new R8S-21 from ARC incorporates a number of refinements and option parts for even greater performance out of the box. The main chassis has been redesigned for the R8S-21 with the slots removed to improve chassis rigidity and handling with the original chassis linkage bars have been replaced with 2.0mm chassis flex plates for increased overall stability and traction. The optional body-shell mount plate is now standard and the front droop is now fully adjustable on the R8S-21. Also standard on the R8S-21 is the steel rear main shaft for…


Social sharing

Who's Online

We have 814 guests online