TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

May 2023
May 2023

May 2023 (18)

Coming from MonTech is their new M23 235mm pan car bodyshell.   The new M23 has aggressive and sharp lines, which give it excellent stability and perfect cornering with lots of traction out of corners.  Molded from premium quality polycarbonate, the kit includes window masks and headlamp and grille decals.  The kit also includes the rear spoiler and the fixing screws. View more images here
Schumacher Racing has released details of its new FT8 front wheel drive 1:10 competition touring car.  The FT8 has been developed by British manufacturer’s world class engineering team to make a fast and great handling front wheel drive touring car.  With a low centre of gravity, light weight, and fine attention to detail, the FT8 is a pleasure to build, maintain, and to drive.  The FT8 contains all the features and adjustments you need from a high end front wheel drive to take you to the top of the podium.  The car in prototype form has achieved some excellent results…
JConcepts has released their F2 body shell for the Tekno ET48 2.0.  The F2 body was constructed to perform at the highest level using the latest trend of reducing surface area above the shock tower line, reducing the overall weight while maintaining a tight silhouette.  No stranger to Truggy bodies, the JConcepts team has developed a successful line of bodies with the Punisher and Finnisher designs, and each has excelled and peaked during championship events.  For the 2023 Dirt Nitro Challenge event, the team focused on a behind tower concept body to fit the Tekno ET48 2.0.  What stands out…
The long running Rome based F1ItalianSeries will for the new season add a Rookie/Gentleman class with Italian F1 specialist manufacturer Fenix Racing introducing its Club Racer as an entry level kit.  Working with the series organisers, Giorgio Favaretto’s company has prepared a very simple yet effective F1 chassis.  With the Rookie/Gentleman class raced together the normal series, the Club Racer combines several components from the Mistral 3.3, such as the sphere differential with titanium rear axle, 7075 motor holder for instance, while chassis and other components being made in 2.5 mm carbon fibre, assuring a model able to deliver proper…
Team Magic has released a front wheel driver version of its E4 1:10 Electric Touring Car platform, the E4FWD.  The car features a 2.2mm Eco-Graphite Chassis and 2.0mm Eco-Graphite Upper Deck with upper deck milling provides predictable handling and fine flex settings.  It has an ultra-compact and efficient gear differential with four composite satellite gears. Housed un a durable differential case with unclosed screw holes, it has a double gasket system for the perfect seal.  The ultra-light Aluminium 7075 spur gear holder has undergone a hard treatment process and it has been carefully optimised.  Front balancing ballast weights improve vehicle stability…
In their latest Monster Truck body release, JConcepts has added the 1997 Ford F-150 to its extensive range.  On the RC scene, very few options exist to bring 1997 to the latest builds and chassis on the market, until now.  JConcepts together with Ford licensing has produced the 10th generation truck to fill the void in the market, and above all, allow racers to consistently build, detail, and tune their RC vehicles into their personal favourites.  The new shell starts with a 13” wheelbase design which aligns with the latest LMT, and long wheelbase RC monster trucks on the market.…
Another new 2023 kit release from Team Associated is their latest 1:10 2WD Shortcourse Track, the RC10SC6.4 Team Kit.  It shares key components with the RC10T6.4, RC10B6.4, and RC10B74.2 Team Kits, making it easier than ever to run multiple classes at the same time. Suspension and jumping goes through the large- volume 13mm big bore shocks with new truck springs.  The new chassis design is a short course truck version of the RC10B6.4 buggy design and gets a new ballstud mount and top plate system with an angled steering for improved consistency.  On top of that, racers can tune the…
JConcepts has announced the release of their S15 body shell for 1:8 Truggy.  The S15 body style is a staple in the line-up at JConcepts. The IFMAR World Championship winning design has served well over the years, even spawning many look-alikes around the industry.  When it comes to Truggy racing, the Florida company has worked on and finalized an S15 for the popular 1:8 truck class to go along with the ROAR National Championship winning F2.  Debuted at the Dirt Nitro Challenge, the S15 took off in the hands of Spencer Rivkin (RC8T4e) in the E-truggy class, and Ryan Maifield…
New from Italian bodyshell producer Evo Race Factory is their latest 1:10 Formula 1 creation, the ER-23.  The third F1 body design from from the Maranello based company, they have not given any specific details or handling characteristics about the lexan body but over its predecessor it features a lower front noise and larger more square side pods.  The body should fit all popular brands of 1:10 formula chassis. View more images here
Team Associated has introduced the latest version of its legendary 1:10 Stadium truck, the RC10T6.4 Team Kit.  It shares key components with the RC10B6.4, RC10B6.4D, and RC10B74.2 Team Kits, making it easier than ever to run multiple classes at the same time. Suspension and jumping goes through the large-volume 13mm big bore shocks with new truck springs.  The new chassis design is a truck version of the RC10B6.4 buggy design and gets a new ballstud mount and top plate system with an angled steering for improved consistency.  On top of that, racers can tune the steering height, axle trail, and…
Capricorn has presented its new ONE .21 GT 2023 engine.  Starting from the base of their already very successful engine, they have updated the latest version with a new Piston and Sleeve.  As usual with their entire engine line, the GT 2023 has a hand tuned piston/sleeve and crankshaft.  The result is an increase of performance keeping the fuel consumption in line with the mandatory 7 minutes.  This engine is a limited edition production specially build for the upcoming 1:8 GT European and World Championship, the latter taking place in Sydney, Australia from October 08-15. View more images here
Reds Racing has released a new version of 721 Scuderia PRO Gen 3 3.5cc Offroad engine.  The latest version features a completely redesigned cooling head for a lower gravity centre, improved aerodynamics for a lower drag and improved engine cooling. Internally it gets new double seal front bearing for increased durability and idle stability and a new rear ceramic bearing for increased durability and reliability.  The new 721 Scuderia Pro Gen3 is a high torque engine which has specifically been developed to noticeably reduce fuel consumption allowing drivers to get a higher runtime compared to other engines on the market.…
Kyosho has just unveiled the 1:12 Phantom EP 4WD Ext Gold 60th Anniversary Limited Edition. The kit is to mark a major year for the iconic Japanese company. On October 10, 2023, Kyosho will celebrate 60 years of bringing joy to life through model hobbies by fulfilling the commitment to our company motto, ‘serious about having fun’. With 60 years of model making know-how and heritage, Kyosho will continue to create products for you to enjoy at fun events through our global network. The 12th edition of the Kyosho Vintage Series, this special edition Phantom EP-4WD Ext features all aluminium…
Italian bodyshell producer MonTech has announced two new bodyshells for the ETS season with the Zero 2 for Touring Car and the Civic for FWD.  The Zero2 is an evolution of the Zero with stability, corner exit traction and direction change speed all being improved. The Civic is new for the FWD category. Very compact with a very forward rear wing to give load and at the same time very fast direction changes and very fast in cornering. Both bodies are available in the Standard version and in the “La Leggera” version and the kits feature headlight and grille decals…
Bittydesign has released a new M-Chassis version of their A45 1:10 FWD body, the A45M.  Inspired by the shapes of a real car, they have created enlarged TCR-style fenders by adapting the proportions and measurements necessary for use with the most common M-chassis models on the market.  The body is universal and fits all the 1:10 M-chassis cars on the market with 210-225mm wheelbase.  It can be mounted on the 4WD chassis as well as on front wheel drive cars.  Made with high quality and genuine polycarbonate Lexan, it is produced only in Light Weight version 0,75mm thickness.  The kit comes…
Sworkz has released their new Carpet Edition S12-2C EVO 1:10 2WD Buggy.  An evolution from their successful S12-2C platform, the new geometry of the car provides optimised corner speeds and easy handling on carpet and very high grip tracks.  The S12-2C EVO features a new carpet version gear box system on a T7075 hard anodised and lightened aluminium chassis.  It has a layout that allows up to 6 different battery positions. The flex of the chassis can be changed by adjusting the sideguards.  The EVO comes with Sworkz brand new designed 1:10 Pro-Shock System (Short version).  The shocks come with…
Mugen Seiki has announced their latest 1:10 Electric Touring Car, the MTC2R.  The new car is an evolution of the successful MTC-2 platform used by Ronald Völker to win the ETS championship two years in a row.  Now the next generation MTC-2R has several updates and improvements.  Volker, designer & racer Robert Pietsch, Eric Dankel together with the whole development team tested extensively on different surfaces and conditions to develop the MTC-2R. View features and more images here
Two more RC crawler body releases from JConcepts with the Florida based company presenting their 2021 Ford Bronco 4-door and 1961 Corvair Lakewood.  The JConcepts team started in 2020 with Ford licensing to build and model an official RC version which would certainly be a highly sought-after vehicle in the market.  In the case of the Ford Bronco by JConcepts, the hands of time moved very slowly to form a product worthy of such a nameplate.  The multi-piece mold delivers increased detail to the front and rear-end of the Bronco to give increased street and off-road appeal.  The chiseled look…

News

Social sharing

Who's Online

We have 212 guests online