TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

Page 4 of 4
Compared  with Pentium- 30A,  this combo uses a switch mode UBEC to replace the built-in linear mode BEC in Pentium-30A, so the combo has a more powerful BEC output capability than the Pentium-25A. The combo is very suitable for 400 and 450 class helicopter. 1  Specification 1.1 Output: Continuous 30A, Burst 40A up to 10 Secs. 1.2 Input Voltage: 2-4 cells lithium battery or 5-12 cells NiCd/NiMH battery. 1.3 BEC: 2A / 5V (Switch mode). 1.4 Max Speed: 210,000rpm for…
1   Specification   1.1 Output: Continuous current 35A, burst current 70A.1.2 Input: 5-9 cells NiMH or 2-3 cells LiPo. 1.3 BEC Output: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Linear mode built-in BEC. 1.4 Suitable Motor: Sensorless Brushless Motor 1.5 External  diameter of the water cooling pipe: 4.0mm 1.6 Size: 48mm(L) * 35mm(W) * 20mm(H).1.7 Weight: 50g 2   Features 2.1 Use top quality electronic components to enhance the current endurance ability of the ESC. 2.2 Special designed for RC boat, with excellent start-up, acceleration and throttle linearity features.…
Platinum-70A-HV-PRO ESC belongs to Hobbywing's "Platinum" series products line, it is the most significant top-class product for aircraft and helicopter. 1  Typical Applications 1.1 Very powerful  for 600 class helicopter (Working with 8 or 10 cells Lipo battery) 1.2 Very powerful for huge scale aircraft such as F3A           2  Specification 2.1 Output: Continuous 70A, burst 105A up to 10 seconds. 2.2 Input Voltage: 5-12 cells lithium battery or 15-36 cells NIMH battery. 2.3 BEC: None. 2.4 Control Signal Transmission: Optically coupled system. 2.5 Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM,…
1   Specification   1.1 Output: Continuous current 90A, burst current 180A.1.2 Input: 6-18 cells NiMH/NiCd or 2-6 cells LiPo. 1.3 BEC Output: 6V@3A Switching mode built-in BEC. 1.4 Suitable Motor: Sensorless Brushless Motor 1.5 External  diameter of the water cooling pipe: 5.0mm 1.6 Size: 94mm(L) * 33mm(W) * 18mm(H).1.7 Weight: 81g 2   Features 2.1 Use top quality electronic components to enhance the current endurance ability of the ESC. 2.2 Special designed for RC boat, with excellent start-up, acceleration and linearity features. 2.3 With water cooling system and the whole ESC is waterproof to get a longer life.…
3.1 High efficiency (>90%), the additional heat-sink is unnecessary in most applications.3.2 New design with lighter weight but bigger torque.3.3 Higher power than the competition, faster acceleration and higher top speed.3.4 Top quality materials: Aluminum shell (case) High quality magnets          Copper wires of high temperature endurance          Good quality bearings3.5  Anti-broken rotor with special workmanship. Brushless ESC for 1:8 Car (Purchase separately )
1   Specification   1.1 Output: Continuous current 150A, burst current 1080A.1.2 Input: 6-18 cells NiMH/NiCd or 2-6 cells LiPo. 1.3 BEC Output: 5.75V/3A (Switch mode built-in BEC). 1.4 Resistance: 0.0002 Ohm. 1.5 Motor Supported: Sensorless and sensored brushless motors 1.6 Suitable Brushless Motor: 6T and > 6T 1.7 Suitable Car: 1/5 on-road or off-road cars / trucks for competitive race.1.8 Size: 68mm(L) * 55mm(W) * 45mm(H).1.9 Weight: 150g(Without wires) 2   Features 1.1   Compatible with all sensorless brushless motors and most of sensored brushless motors such…
1   Specification   1.1 Output: Continuous current 120A, burst current 760A.1.2 Input: 3-6 cells NiMH/NiCd or 1-2 cells LiPo.   Note1 1.3 BEC Output: 6V@2A built-in BEC. 1.4 Resistance: 0.0003 Ohm. 1.5 Motor Supported: Sensored brushless / Sensorless Brushless. 1.6 Suitable Brushless Motor: With 1 cell Lipo or 3-4 cells NiMH, 1/12 on-road: >=2.5T  With 2 cells Lipo or 5-6 cells NiMH, 1/10 on-road: >=3.5T, 1/10 off-road:  >=5.5T    1.7 Suitable Car: 1/10, 1/12 on-road or off-road cars for competition race. 1/10, 1/8 rock crawler.1.8 Size: 43mm(L) * 36mm(W)…
1   The Combo Incluedes:   1.1 Speed Controller (ESC): XERUN-150A-SD or XERUN-80A-SD 1 pcs.1.2 Motor: For Combo-M1A or Combo-M3A Sensorless motor: XERUN-4168SL or XERUN-4274SL 1 pcs. For Combo-M5A or Combo-M6A Sensored motor: XERUN-4168SD or XERUN-4274SD 1 pcs.1.3 Motor Pinion: 2 pcs. 1.4 Programmer: Professional LCD Program Box: 1 pcs (Option). 1.5 Other Accessories: Double-side gummy tape, Screws for fixing  the ESC, Heat-shrink tubing, Logo labels, etc.  
1   Specification   1.1 Output: Continuous current 60A, burst current 360A.1.2 Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.   Note1 1.3 BEC Output: 5.75V@3A linear mode built-in BEC. 1.4 Resistance: 0.0006 Ohm. 1.5 Motor Supported: Sensored brushless / Sensorless Brushless. 1.6 Suitable Brushless Motor: With 2 cells Lipo or 4-6 cells NiMH, 1/10 on-road: >=5.5T, 1/10 off-road:  >=8.5T  With 3 cells Lipo or 7-9 cells NiMH, 1/10 on-road: >=10.5T, 1/10 off-road:  >=17.5T    1.7 Suitable Car: 1/10, 1/12 on-road or off-road cars / trucks for competitive or normal  race.…
Page 4 of 4

Social sharing

Who's Online

We have 205 guests online