TQ R/C & Hobbies

Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025)

 

Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:


Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:

https://forms.gle/ZqUybUaVissSRpbb8

Registration fee: IDR 300,000 per racer, eligible for 20 run

Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country.  For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.

Regulation:

1.  Race system is bracket system 4-2-1

Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined

2.  All parts MUST BE Tamiya original parts. 
3.  Racer can use their own rechargeable batteries
4.  Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5.  Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.

Other things to note:

1.  Please note that all racers should bear their own tickets and accomodation to Jakarta.
2.  Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.

  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  3 
  •  4 
  •  5 
  •  Next 
  •  End 
  • »
Page 1 of 5

Rate this item
(0 votes)
Limited Edition R/C Product 1/10 R/C M-07R Chassis Kit Item No: 84436 ★The revolutionary M-07 Concept chassis comes paired with TRF (Tamiya Racing Factory)-selected parts for a superbly balanced racing setup! ★High-traction lower deck, carbon fiber battery holder, TRF special dampers, reinforced suspension components and more. ★Smooth drivetrain employs oil-filled gear differentials and double-cardan driveshafts. Featured Components ★Carbon fiber battery holder* ★High-traction lower deck ★Reinforced C parts (uprights) ★Reinforced D parts (suspension arms) ★TRF special…
Rate this item
(0 votes)
Futaba S9452 Digital High-Speed/Torque Servo Stock Number FUTM0662 Manufacturer Number S9452 AccessoriesNeeded PartsListing Notes from the Tech Department This is the S9452 Digital Hi-Speed.Hi-Torque Servo for many applications, especially, On-Road Touring Car Use and Comes with "J" Connector Installed. This servo is designed to be used with 6V receiver packs. This servo replaced the S9451 servo. FEATURES: Digitally Enhanced Microprocessor Cut About half the Response Time From Transmitter Input To Servo Reaction. Coreless Motor with…
Rate this item
(0 votes)
S9353HV High-Voltage High-Torque High-Speed Servo Stock Number FUTM0721 Manufacturer Number S9353HV AccessoriesNeeded PartsListing Notes from the Tech Department This is the Futaba S9353 High Voltage, High Torque, High Speed Servo FEATURES: Designed to be used with models requiring especially high torque and high speed Metal casing helps dissipate heat One year limited warranty through Hobby Services beginning at date of purchase INCLUDES: Futaba S9353 Servo with 1.7" (43mm) 3-point Horn, 3x8mm Servo Horn Screw, four…
Rate this item
(0 votes)
Futaba S9352HV High-Voltage High-Torque/Speed Servo Stock Number FUTM0720 Manufacturer Number S9352HV AccessoriesNeeded PartsListing Notes from the Tech Department This is the S9352HV High Torque/High Speed Digital Servo from Futaba. FEATURES: Designed to be used with models requiring especially high torque and high speed One year limited warranty through Hobby Services beginning at date of purchase INCLUDES: Futaba S9352HV Servo with 1.7" (42.3mm) 3-Point Horn, 3x8mm Horn Screw, four Eyelets, two Rubber Grommets and Instruction Sheet…
Rate this item
(0 votes)
Futaba S9157 Digital High-Torque Servo Stock Number FUTM0217 Manufacturer Number S9157 AccessoriesNeeded PartsListing Notes from the Tech Department This is the Futaba S9157 High Torque Servo. FEATURES: Ideal for large competition airplanes Coreless motor Dual ball bearings and metal gears Metal middle case helps dissipate heat for cooler operation One year limited warranty INCLUDES: Futaba S9157 High Torque Servo with 0.83" (21mm) diameter round horn, 1.8" (45mm) diameter round horn, 1.2" (31.5mm) 6 point horn,…
Rate this item
(0 votes)
Futaba S9650 Digital Mini Servo Stock Number FUTM0260 Manufacturer Number S9650 AccessoriesNeeded PartsListing Notes from the Tech Department This is a High Torque, High Speed Digital Mini Servo from Futaba. FEATURES: Coreless motor: conventional servo motors have a steel core armature wrapped with wire that spins inside magnets. In a coreless design the armature uses a wire mesh that forms a cup that spins around the outside of a magnet. This arrangement is much lighter,…
Rate this item
(0 votes)
Futaba S3152 Digital Standard High-Torque Servo Stock Number FUTM0311 Manufacturer Number S3152 AccessoriesNeeded PartsListing Notes from the Tech Department This is the S3152 Digital Servo w/Ball Bearings for airplane, car and boat Use and Comes with "J" Connector Pre-Installed. FEATURES: Comes with Heavy Duty wiring that can handle Higher Current Loads Ball Bearing Output Shaft Nylon gears High Torque Great for 1/8 Cars or Boats Where Higher Torque and Speed are Needed One year limited…
Rate this item
(0 votes)
Futaba S3151 Digital Sport BB Servo Stock Number FUTM0310 Manufacturer Number S3151 AccessoriesNeeded PartsListing Notes from the Tech Department This is the Futaba S3151 Digital Servo. Great for a wide variety of R/C models. FEATURES: Digital technology gives performance advantage One Ball Bearing and one Metal Bushing Nylon gears One year warranty INCLUDES: One S3151 Digital servo with preinstalled servo horn Four Rectangular Grommets Four Mounting Screws One Large Round Horn One Six Arm Horn…
Rate this item
(0 votes)
Futaba R614FS 4-Channel FASST Receiver 4PKS Stock Number FUTL7635 Manufacturer Number FUTL7635 AccessoriesNeeded PartsListing Notes from the Tech Department This is the 2.4GHz FASST R614FS 4-Channel Receiver used with the Futaba 4PKS Surface Radio System from Futaba. FEATURES: Normal and high-speed modes for analog or digital servos including the BLS series One year limited warranty through Hobby Services beginning at date of purchase INCLUDES: 2.4GHz FASST R614FS 4-Channel Receiver with Instruction Manual Internal and External…
Rate this item
(0 votes)
Futaba R614FF 4-Channel 2.4GHz FASST Receiver 4PK/4PKS Stock Number FUTL7633 Manufacturer Number FUTL7633 AccessoriesNeeded PartsListing Notes from the Tech Department This is the R614FF 2.4 GHz FASST Receiver for use with the Futaba 2.4GHz 4PK and 4PKS Surface Radio System. FEATURES: Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts very quickly virtually eliminating signal conficts and interruptions unlike other 2.4GHz systems that only stay on one or two frequencies. Small and lightweight, for surface use…
  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  3 
  •  4 
  •  5 
  •  Next 
  •  End 
  • »
Page 1 of 5

Social sharing

Who's Online

We have 681 guests online