Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025)
Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:
Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:
https://forms.gle/ZqUybUaVissSRpbb8
Registration fee: IDR 300,000 per racer, eligible for 20 run
Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country. For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.
Regulation:
1. Race system is bracket system 4-2-1
Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined
2. All parts MUST BE Tamiya original parts.
3. Racer can use their own rechargeable batteries
4. Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5. Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.
Other things to note:
1. Please note that all racers should bear their own tickets and accomodation to Jakarta.
2. Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.
Item No:95181
Mini 4WD Limited Edition Products
CROSS SPEAR 01 (VZ CHASSIS) JAPAN CUP 2025
This assembly kit creates a special version of the Cross Spear 01 released to commemorate the running of the Mini 4WD 2025 Japan Cup, and given a tasteful white and blue-themed color scheme. The original Cross Spear 01 body is the brainchild of Japanese designer Takayuki Yamazaki, who gave it a thrusting, spear-like design. The body is molded in white plastic, and stickers with various logos are included to decorate it. The VZ chassis is a popular choice for Mini 4WD racers, and has its main chassis and A parts molded in matching blue. 5-spoke wheels are fluorescent orange, and paired with super hard low-profile tires featuring commemorative sidewall lettering.
VZ Chassis
The VZ chassis is a compact and lightweight design that features reinforced designs for bumper, rear stay base and more ensuring that it has the durability and flexibility to withstand racing accidents. It is also a rather adaptable unit that lets its owner make numerous updates to the setup. Low friction 620 plastic bearings are molded in POM and maximize drive efficiency, while the chassis and A parts are molded in ABS. This chassis features a gear ratio of 3.5:1.
Specifications
★Length: 158mm ★Width: 98mm ★Height: 35mm ★Small-diameter tires ★Includes motor ★Easy snap-together assembly
Separately Required Items
★R6/AA/UM3 batteries (x2)
Information is current as of July 8, 2025. Specifications are subject to change without notice.
Item No:60794
1/72 War Bird Collection No.94
1/72 SCALE LOCKHEED MARTIN® F-35®C LIGHTNING II®
The F-35C is a variant of the cutting-edge F-35 Lightning II, which is designed for aircraft carrier use with larger wing and stabilizers, plus folding wingtips.
About the Model
★Fuselage length: 218mm, wingspan: 182mm. ★The low observability form of the F-35C is artfully captured in 1/72 scale, with delicate recreations of raised RAM (Radar Absorbent Material) sections. ★Choose whether to assemble the model with folded or extended wingtips. ★Reinforced landing gear struts are recreated. ★Assemble with canopy open or closed. ★Two AIM-9X air-to-air missiles are included. ★Comes with a pilot figure. ★6 marking options included.
Information is current as of July 2, 2025. Specifications are subject to change without notice.
Item No:47520
Special Edition R/C Models No.220
1/10 SCALE R/C M-07R CHASSIS KIT
This R/C FWD chassis assembly kit takes the cutting-edge M-07 Concept chassis and pairs it with a range of Tamiya Racing Factory (TRF) hand-picked option parts for a racing setup. It features a high-traction lower deck for a ground-hugging drive, plus carbon fiber battery holders, TRF special dampers, reinforced suspension arms and uprights, as well as rear stabilizer. The result is super grip, even on low-traction surfaces. An efficient drivetrain includes oil-filled gear differentials, full ball bearings, double cardan drive shafts, aluminum cup joints, hard coated aluminum pinion gear and more.
Featured Components
★Carbon fiber battery holder* ★Rear stabilizer ★TRF special dampers (hard black coating) ★Double-cardan drive shafts (33mm) ★High-traction lower deck ★Reinforced C parts (uprights) ★Reinforced D parts (suspension arms) ★3x106mm aluminum turnbuckle shafts ★Aluminum joint cups ★Clamp-type aluminum wheel hubs (5mm) ★2.6mm diameter titanium-coated shafts ★46mm titanium-coated shafts ★06 module aluminum pinion gear (20T) ★Full ball bearings ★Hi-torque servo saver (black)
*dedicated component
Specifications
●Length: 332mm (including bumper) ●Width: 164mm ●Wheelbase: 225mm or 239mm (selectable) ●Monocoque frame ●Front-midship motor, front-wheel drive ●Oil-filled gear differential ●3-piece steering tie-rod ●4-wheel independent double wishbone suspension ●TRF special dampers ●Gear ratio = 5.78:1 using included 20T pinion gear (7.22:1 - 4.81:1 available with separately sold pinion gears) ●Contact your local Tamiya Agent regarding the ESC.
Separately Required Items
★Compatible body ★2-Channel R/C System w/ESC ★R6/AA/UM3 batteries for transmitter ★Type 540 Motor ★Battery Pack & Charger
Information is current as of July 2, 2025. Specifications are subject to change without notice.
Item No:35390
1/35 Military Miniature Series No.390
1/35 SCALE U.S. TANK DESTROYER M36
The 1/35 Military Miniature series welcomes the M36, a U.S. tank destroyer which made its combat debut in October 1944 and played a significant role in the Battle of the Bulge that December, accounting for a number of German tanks. ★The open top form of the M36 is captured with accuracy. ★The turret interior has detailed depictions of the gun breech, sights and more. ★The slide molded counterweight on the turret rear offers great realism balanced by ease of assembly. ★Marking options include a winter camouflage scheme.
Information is current as of July 2, 2025. Specifications are subject to change without notice.
Our Products
Social sharing
Who's Online
We have 188 guests online
Powered by ©Tukang-web.com. All rights reserved.