TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

Hotshot II Blockhead Motors

Friday, 03 March 2023 11:11 Published in Tamiya

Electric R/C Car Series no.710

Hotshot II Blockhead Motors

Item No: 58710

Customized Hotshot II
The Hotshot II debuted in 1987, a follow up to the Hotshot, our wildly popular first-ever shaft driven 4WD buggy. Now, the Hotshot II makes a re-appearance with various tweaks added by the famous Japanese designer Mr. Jun Watanabe. It features an overhauled color scheme of brilliant blue (body and wing are pre-painted in this color, and pre-cut), with a prominent white stripe. The driver figure position has also been reevaluated, while the upper deck and roll cage are new components, bringing the driver up to a more realistic location. Guards and car number plates were also designed by Watanabe, while the motor has a dedicated sticker.

Shaft Driven 4WD Chassis
Based upon the original Hotshot II design, this shaft driven 4WD chassis has sealed gearboxes and differentials front and rear and gives an intuitive drive. The front of the four-wheel double wishbone suspension employs a monoshock setup, with two dampers at the rear (all are CVA oil dampers molded in yellow), while metal plated parts such as uprights and wheels give the model a realistic look. The latter are shod with hybrid oval block/pin spike low-profile tires.

Specifications
★Length: 390 mm, width: 235 mm, height: 150 mm ★Weight: 1,285 g ★Tread: 205 mm (front), 200 mm (rear) ★Tire width/diameter: 31/88 mm (front), 38/88 mm (rear) ★ABS monocoque ★Shaft-driven 4WD ★3-bevel differential gears ★2-piece steering tie-rod ★4-wheel double wishbone suspension ★Gear ratio = 8.70:1 ★Type 540 motor (with dedicated sticker) ★Electronic speed controller (ESC) is sold separately.

Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of February 2, 2023. Specifications are subject to change without notice.

TT-02BR Chassis Kit

Friday, 03 March 2023 11:08 Published in Tamiya

Electric R/C Car Series no.717

TT-02BR Chassis Kit

Item No: 58717

Race-Oriented Buggy Chassis
This chassis assembly kit is an upgraded version of the 4WD off-road TT-02B chassis kit with a wealth of extra parts. The drivetrain uses XV-02 oil gear differential units to adjust the effectiveness of gear differential, propeller joints with internal plastic parts to limit wear, front and rear universal drive shafts, and full ball bearings. Its suspension features new 3mm thickness carbon fiber damper stays to give more setup options, while the angle of rear wing high downforce is adjustable. Longer turnbuckle shafts help prevent plastic adjuster sections from deforming.

Featured Components
★New aluminum propeller joints ★New carbon fiber damper stays
Item 22049 XV-02/TT-02 Oil Gear Differential Unit
Item 54501 TT-02 Aluminum Propeller Shaft
Item 54768 06 Module Hard Coated Aluminum Pinion Gear (17T)
Item 54993 TT-02B/DF-03 Aluminum Damper Set
Item 53793 DF-02 Two-Way Aluminum Rear Uprights
Item 54539 TT-02B Full Turnbuckle Set
Item 53791 DF-02 Assembly Universal Shaft
Item 53880 Large Dish Wheels (4WD/Front, 62/25)
Item 53881 Large Dish Wheels (Rear, 62/35)
Item 54211 TRF201 Rear Wing Set
Item 54815 TT-02B Reinforced Gear Covers & Lower Suspension Arms (2pcs.)
Item 54926 TT-02 Lower Deck (Hard/Black)
★Full ball bearings

Specifications
★Length: 388mm, width: 183mm, height: 258mm ★Wheelbase: 258mm ★Bathtub type frame ★Shaft driven 4WD ★Front/rear oil gear differentials (with dedicated diff joints) ★3-piece steering tie-rod ★4-wheel independent double wishbone suspension ★Oil dampers with aluminum cylinders ★Gear ratio = 10.71:1 (with kit standard pinion) ★Motor and electronic speed controller (ESC) sold separately.

Separately Required Items
★Motor ★Tires ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of February 2, 2023. Specifications are subject to change without notice.

TT-02 Type-SRX Chassis Kit

Friday, 03 March 2023 11:06 Published in Tamiya

Electric R/C Car Series no.720

TT-02 Type-SRX Chassis Kit

Item No: 58720

Racy TT-02
This kit sees the versatile beginner chassis TT-02 paired with a host of Hop-Up Options and other parts to raise its racing ability and tuneability. The efficient drivetrain employs a front direct coupling and double cardan drive shafts, with a rear oil gear differential. TRF420 design suspension arms give great feedback during your drive, and the rear suspension can be fine-tuned via its adjustable mount. Its 27T pinion and 68T spur gears give a gear ratio of 6.55:1.

Featured Components
New aluminum propeller joints
Item 22054 37mm Drive Shafts for Double Cardan Joint Shafts (2pcs.)
Item 22049 XV-02/TT-02 Oil Gear Differential Unit
Item 22047 XV-02/TT-02 Front Direct Coupling Set (39T)
Item 54981 06 Module Hard Coated Aluminum Pinion Gear (27T)
Item 54886 TRF419 Suspension Upgrade Set
Item 54799 TT-02 Hi-Torque Servo Saver Set (w/Aluminum Horn)
Item 54501 TT-02 Aluminum Propeller Shaft
Item 54500 TT-02 High Speed Gear Set (68T)
Item 53823 Clamp Type Aluminum Wheel Hub (5mm Thick)
Item 53576 TRF Damper Oil Seal (4pcs.)
Item 42357 Cross Joints for Low Friction Assembly Universal Shafts
Item 42323 Short Ball Connector Nuts for TRF Dampers (8pcs.)
Item 42143 4mm Aluminum Serrated Wheel Nut (4pcs./Blue)

Specifications
★Length: 361mm, width: 183mm ★Wheelbase: 258mm ★Bathtub type frame ★Longitudinal motor, shaft driven 4WD ★Front direct coupling, rear oil gear differential ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★CVA oil dampers ★Gear ratio = 6.55:1 (with kit standard 27T pinion and 68T spur gears) ★Type 540 motor and electronic speed controller (ESC) are sold separately.

Separately Required Items
★Body ★Brushless motor ★Tires ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of February 2, 2023. Specifications are subject to change without notice.

TT-02BR Gearbox Joints

Friday, 03 March 2023 11:04 Published in Tamiya

Hop-Up Options no.2062

TT-02BR Gearbox Joints

Item No: 22062

★These durable steel gearbox joints are designed to handle the demands of off-road buggies. ★They can be used as spare parts for the TT-02BR chassis, or with the TT-02B, if used in conjunction with separately sold Items 22049 XV-02/TT-02 Oil Gear Differential Unit and 53791 DF-02 Assembly Universal Shaft. ★The image at right shows an example of attachment to the TT-02B chassis.

Compatible Chassis
TT-02B1, TT-02BR2 Chassis
1: Use with Item 22049 XV-02/TT-02 Oil Gear Differential Unit and Item 53791 DF-02 Assembly Universal Shaft.
2: Fitted as standard.

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of February 8, 2023. Specifications are subject to change without notice.

TT-02BR Gearbox Joints for Ball Differential

Friday, 03 March 2023 11:01 Published in Tamiya

Hop-Up Options no.2063

TT-02BR Gearbox Joints for Ball Differential

Item No: 22063

★These durable steel gearbox joints are used when fitting the TT-02BR chassis with separately sold Item 22046 XV-02/TT-02 Ball Differential Set (39T). ★Use with Item 53791 DF-02 Assembly Universal Shaft. ★Contains two each of gearbox joints, needle pins and axle rings.
★The image at right shows an example of attachment to the TT-02B chassis.

Compatible Chassis
TT-02B2 & TT-02BR1 Chassis
1: Use with Item 22046 XV-02/TT-02 Ball Differential Set (39T).
2: Use with Item 22046 XV-02/TT-02 Ball Differential Set (39T) and Item 53791 DF-02 Assembly Universal Shaft.

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of February 8, 2023. Specifications are subject to change without notice.

TT-02 Type-SRX Front Direct Cup Joints

Friday, 03 March 2023 10:57 Published in Tamiya

Hop-Up Options no.2064

TT-02 Type-SRX Front Direct Cup Joints

Item No: 22064

★These durable steel gearbox joints and plastic swing shaft caps can be used as spare parts for the TT-02 Type-SRX chassis, or when fitting separately sold Item 22047 XV-02/TT-02 Front Direct Coupling Set (39T) to the TT-02 chassis. ★Please note that some chassis may require use of other separately sold swing shafts or wheel axles. ★Contains two gearbox joints, four plastic swing shaft caps, two needle pins and two axle rings.

Compatible Chassis
TT-02 Type-SRX1 & XV-022 Chassis
*Please see below for a list of other required parts when using on various TT series chassis.
1: Fitted as standard.
2: Use with Item 22047 XV-02/TT-02 Front Direct Coupling Set (39T).

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

When using on TT-02, TT-02D, TT-02R, TT-02RR and TT-01 chassis
Use with:
Item 22047 XV-02/TT-02 Front Direct Coupling Set (39T)
Item 22064 TT-02 Type-SRX Front Direct Cup Joints
Item 53499 Wheel Axles for Assembly Universal Shaft Set
Item 53500 Cross Joints for Assembly Universal Shaft Set
Item 54969 33mm Lightweight Aluminum Swing Shafts (2pcs.)

When using on TT-02 Type-S chassis (with front universal shafts)
Use with:
Item 22047 XV-02/TT-02 Front Direct Coupling Set (39T)
Item 22064 TT-02 Type-SRX Front Direct Cup Joints
Item 51445 TRF417 Wheel Axle (2pcs.)
Item 51444 TRF417 Cross Joint Set
Item 53506 39mm Lightweight Rear Swing Shafts for Assembly Universal Shaft Set

When using on TT-02 Type-S chassis (with front direct coupling)
Use with:
Item 22047 XV-02/TT-02 Front Direct Coupling Set (39T)
Item 22064 TT-02 Type-SRX Front Direct Cup Joints
Item 42373 39mm Drive Shafts for Double Cardan Joint Shafts (2pcs.)
Item 42221 Cross Joint for Double Cardan Joint Shaft (2pcs.)
Item 42218 Axle Shaft for Double Cardan Joint Shaft (2pcs.)
Item 42219 Joint Casing for Double Cardan Joint Shaft (2pcs.) OR Item 42320 Lightweight Joint Casings for Double Cardan Joint Shafts (2pcs.)

When using on TT-02 Type-SR chassis (with kit standard double cardan drive shafts)
Use with:
Item 22047 XV-02/TT-02 Front Direct Coupling Set (39T)
Item 22064 TT-02 Type-SRX Front Direct Cup Joints
Item 42373 39mm Drive Shafts for Double Cardan Joint Shafts (2pcs.)
*As TT-02 Type-SR double cardan shafts are 42mm as standard, only drive shafts need to be changed.

Information is current as of February 8, 2023. Specifications are subject to change without notice.

U.S. Howitzer Motor Carriage M8

Friday, 03 March 2023 10:54 Published in Tamiya

1/48 Military Miniature Series no.104

U.S. Howitzer Motor Carriage M8

Item No: 32604

Mighty Mouse
U.S. designers developed the M8 during WWII as an upgrade over existing half-track vehicles, using the M5 light tank chassis with an open turret on top; its 75mm M3 howitzer could fire anti-tank and smoke shells in addition to standard rounds. 1,778 M8s were produced between September 1942 and January 1944, and they served wherever U.S. units were active, until the end of the conflict: in Italy, Western Europe and the Pacific, utilizing their excellent mobility and firepower in a range of missions including attacks on enemy fortifications.

About the Model
★This is a 1/48 scale plastic model assembly kit. Lenth: 92mm, width: 48mm. ★The diminutive M8 form with tall profile is recreated accurately based upon extensive research. ★Features interior details of turret such as sights and gun breech, plus howitzer covered by its distinctive sleeve. ★Realistically captured suspension with ergonomic parts breakdown. ★Assembly type tracks feature one-piece straight sections. ★Includes one commander figure and two marking options.

★Precision cementing
Item 87188 Tamiya Multipurpose Cement (Clear)

★Present your model as it deserves to be displayed
Item 73004 Display Case C

Information is current as of January 30, 2023. Specifications are subject to change without notice.

Lotus type 78 (w/Photo Etched Parts)

Friday, 03 March 2023 10:50 Published in Tamiya

1/12 Big Scale Racing Car Series no.37

Lotus type 78 (w/Photo Etched Parts)

Item No: 12037

A Pioneer
Renowned as one of the pioneers of the wing car era, the Lotus Type 78 debuted in the 1977 Argentine Grand Prix to much acclaim for its sleek, aerodynamic form. The inverted gull wing shaping on the underside of its side pontoons generated significant downforce via the "ground effect," without adding significant drag, giving the Type 78 exemplary cornering speed. In the highly capable hands of Mario Andretti and Gunnar Nilsson, it triumphed in the United States Grand Prix West, and the Spanish, French, Italian and Belgian Grand Prix. It raced into the first half of the 1978 season, and helped put the Lotus team firmly back on the map.

About the Model
★This is a 1/12 scale plastic model assembly kit. Length: 381 mm, width: 171 mm, height: 76 mm. ★Features moving coil-sprung suspension. ★The steering wheel turns the front wheels. ★A highly realistic depiction of the engine features numerous pipes and lines. ★Removable front and cockpit cowls, radiator ducts and induction box allow inspection of the model interior, even after its completion. ★Comes with photo-etched parts for radiator cores, brake discs, two different types of wing end plates, and more. ★Decals include recreation of Goodyear logos on the nose tip and wing plates.

★Useful tools and materials in the construction of your model
Item 74066 Diamond File (for Photo-Etched Parts)
Item 74068 Modeling Scissors (for Photo-Etched Parts)

★Precision cementing
Item 87091 Tamiya CA Cement (Gel Type)
Item 87188 Tamiya Multipurpose Cement (Clear)

Information is current as of February 2, 2023. Specifications are subject to change without notice.

Bumperless N-03/T-03 Units

Friday, 03 March 2023 10:48 Published in Tamiya

Grade-Up Parts Series no.382

Bumperless N-03/T-03 Units

Item No: 15382

★Combined with separately sold FRP plates, these bumperless components allow aggressive roller setups. ★They weigh only around half of standard N-02 and T-01 units. ★520 plastic bearings and small parts for attachment are included.

Compatible Cars
MS Chassis cars

Specifications are subject to change without notice.

3mm Hex Shaft Set

Friday, 03 March 2023 10:46 Published in Tamiya

Educational Construction Series no.252

3mm Hex Shaft Set

Item No: 70252

★3mm hex shafts are a vital component in Tamiya Educational Construction Series creations, and this set makes available a number of shorter varieties. ★Use them to make more compact constructions. ★It contains four each of 3x38 mm, 3x50 mm, 3x60 mm and 3x72 mm shafts. ★Why not use them together with other components such as universal joint sets and the shaft drive unit?

Information is current as of February 2, 2023. Specifications are subject to change without notice.

Social sharing

Who's Online

We have 1552 guests online