Special Edition R/C Parts No.209

Item No:47509

XM-01 TITANIUM SCREW SET

This set contains 99 lightweight and tough titanium screws that wil give a weight savings of around 25 grams compared to the kit standard screws.

Information is current as of May 2, 2024. Specifications are subject to change without notice.

R/C Spare Parts No.1749

Item No:51749

XM-01 D PARTS (SUSPENSION ARMS)

Replace parts in a timely fashion to ensure that your car runs at peak performance.

Information is current as of May 2, 2024. Specifications are subject to change without notice.

R/C Spare Parts No.1748

Item No:51748

XM-01 C PARTS (UPRIGHTS)

Replace parts in a timely fashion to ensure that your car runs at peak performance.

Information is current as of May 2, 2024. Specifications are subject to change without notice.

R/C Spare Parts No.1747

Item No:51747

XM-01 B PARTS (BUMPERS)

Replace parts in a timely fashion to ensure that your car runs at peak performance.

Information is current as of May 2, 2024. Specifications are subject to change without notice.

All Electric R/C Car Series No.736

Item No:58736

1/10 R/C FORD BAJA BRONCO (CC-02)

The first generation Ford Bronco was relatively compact and extremely capable off-road, and this 4WD car joined numerous races. This R/C model assembly kit recreates the Baja Bronco, which was sold from 1971 to 1975 to commemorate victory in a major desert race. Its polycarbonate body captures the 1973 Bronco form in style, with a black sticker to use on the engine hood, and plated parts for the front grille, light covers and side mirrors. It can be paired with separately sold LEDs to light up the front and rear.

CC-02 Chassis - Off Road, Evolved
Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis' ladder frame is inspired by full-size vehicles and is the base for its superior durability. A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Four-link rigid suspension is employed front and rear, with CVA oil dampers for all-encompassing control, even on tricky rock sections. This model comes with plated five-spoke wheels and grippy block pattern tires, and is setup for the 242mm S wheelbase.

Specifications
★Length: 395mm, width: 196mm, height: 215mm ★Wheelbase: 242mm ★Tread: 160mm (front), 163mm (rear) ★Tire width/diameter: 33/90mm (front & rear) ★Ladder frame ★Longitudinal motor, shaft-driven 4WD ★3-bevel differential gears ★4-link rigid suspension (front & rear) ★Gear ratio = 17.33:1 (using kit-standard 16T pinion) ★Type 540 motor ★Contact your local Tamiya Agent regarding the ESC

Separately Required Items
★2-channel R/C system ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of April 3, 2024. Specifications are subject to change without notice.

All Electric R/C Car Series No.739

1/10 R/C 1998 Honda NSX RACING (TT-02)

Item No:58739

The NSX - a midship engine sports car released in 1990 – achieved success in races all over the world and also took part in Japanese GT car races from 1996. The 1998 version employed a 3.5-liter V6 engine, and featured improved aerodynamics, low center of gravity, improved brake system and easier maintenance. Four cars were raced that year and achieved five victories.

The TT-02 is a highly balanced chassis offering shaft-driven 4WD along with 4-wheel double wishbone suspension and coil-sprung dampers, as well as common suspension arm and upright components for an easier assembly process.

Information is current as of April 10, 2024. Specifications are subject to change without notice.

All Electric R/C Car Series No.739

Item No:58739

1/10 R/C 1998 Honda NSX RACING (TT-02)

The NSX - a midship engine sports car released in 1990 – achieved success in races all over the world and also took part in Japanese GT car races from 1996. The 1998 version employed a 3.5-liter V6 engine, and featured improved aerodynamics, low center of gravity, improved brake system and easier maintenance. Four cars were raced that year and achieved five victories.

The TT-02 is a highly balanced chassis offering shaft-driven 4WD along with 4-wheel double wishbone suspension and coil-sprung dampers, as well as common suspension arm and upright components for an easier assembly process.

All Electric R/C Car Series No.734

Item No:58734

1/10 R/C CITROEN DS (MB-01)

The Citroën front-wheel drive saloon car DS was honored with third place in the 1999 Car of the Century awards. In 1955, the Citroën DS was announced in Paris and it was sometimes dubbed the “spaceship’’ for its aerodynamic design. In addition, it featured hydraulically controlled mechanisms such as suspension, gearbox, clutch, steering and brakes. Around 1.45 million units including variants were produced between 1955 and 1975.

This R/C model assembly kit is based upon the MB-01 chassis. The MB-01 chassis gives a choice of three types of wheelbase, and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.

Information is current as of April 10, 2024. Specifications are subject to change without notice.

All Electric R/C Car Series No.738

Item No:58738

1/10 R/C XM-01 PRO CHASSIS KIT

This compact shaft-driven 4WD chassis assembly kit features a front midship motor and transmits power from the spur gear in the center via front and rear propeller shafts. A longitudinal upright battery pack is positioned in the left side, contributing to optimum balance. Changing the rear section allows a choice from three wheelbases. The 4-wheel independent double wishbone suspension has aluminum-cylinder oil dampers. Front caster angle is 5 degrees, and hub carriers and uprights allow two types of ground clearance, while the front bumper skid angle reduces surface contact.

Featured Components
●Front & rear oil-filled gear differentials (two 39T and one 40T included) ●Front & rear universal drive shafts ●Aluminum oil dampers (touring car size) ●Hub carriers & uprights allow ground clearance changes ●Turnbuckle upper arms ●Full ball bearings ●Hi-torque servo saver (black) ●Polycarbonate chassis cover

Specifications
●Length: 308mm (with 225mm wheelbase) ●Width: 165mm ●Choice of 210mm, 225mm and 239mm wheelbases ●Bathtub frame ●Front midship motor, shaft-driven 4WD ●Front/rear oil filled gear differentials ●3-piece steering tie-rod ●4-wheel independent double wishbone suspension ●Aluminum cylinder oil dampers ●Gear ratio = 8.27:1 (with kit 22T pinion; 13 ratios between 10.71 and 6.28:1 are possible with separately sold pinions) ●Contact your local Tamiya Agent regarding the ESC

Separately Required Items
●M-Chassis compatible body ●Type 540 motor ●Tires ●2-channel R/C system ●Battery pack & charger

Information is current as of April 9, 2024. Specifications are subject to change without notice.

Masking No.226

Item No:87226

ULTRA THIN ALUMINUM STICKERS (2PCS.)

These semi-gloss aluminum stickers let fine detail show through thanks to their thinness, and are a great choice for static model car window frames among other uses. They can also be used for demarcation when painting your models. ★Thickness: 0.01mm ★Contains two 100mm x 144mm sheets.

Information is current as of April 3, 2024. Specifications are subject to change without notice.